Administrator Guide
IPv6 Basics
IPv6 basic commands are supported on the Dell Networking operating system.
NOTE: For information about the Dell Networking operating software version and platform that supports IPv6 in each
software feature, refer to the IPv6 Addressing chapter of the Dell Networking OS Configuration Guide.
Topics:
• cam-ipv6 extended-prefix
• clear ipv6 fib
• clear ipv6 mld_host
• clear ipv6 neighbors
• ipv6 address
• ipv6 address autoconfig
• ipv6 address eui64
• ipv6 control-plane icmp error-rate-limit
• ipv6 flowlabel-zero
• ipv6 host
• ipv6 name-server
• ipv6 nd dad attempts
• ipv6 nd disable-reachable-timer
• ipv6 nd dns-server
• ipv6 nd prefix
• ipv6 neighbor
• ipv6 route
• ipv6 unicast-host-route
• ipv6 unicast-routing
• show cam-ipv6 extended-prefix
• show ipv6 cam linecard
• show ipv6 control-plane icmp
• show ipv6 fib linecard
• show ipv6 flowlabel-zero
• show ipv6 interface
• show ipv6 mld_host
• show ipv6 neighbors
• show ipv6 route
cam-ipv6 extended-prefix
Enable LPM CAM partitioning to support the storage of extended IPv6 (/65 to /128) route prefixes in LPM partition 1.
C9000 Series
Syntax
cam-ipv6 extended-prefix max-ipv6-prefixes
To remove LPM partitioning configuration, use no cam-ipv6 extended-prefix.
Parameters
max-ipv6-
prefixes
Maximum number of extended IPv6 prefixes with the mask length of /65 to /128
that are supported in the LPM partition. The possible values are 1024, 2048, and
3072.
28
974 IPv6 Basics