Administrator Guide

Version Description
7.4.1.0 Introduced on the E-Series TeraScale.
clear ipv6 mld_host
Clear the IPv6 MLD host counters and reset the elapsed time.
C9000 Series
Syntax
clear ipv6 mld_host
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
clear ipv6 neighbors
Delete all entries in the IPv6 neighbor discovery cache or neighbors of a specific interface. Static entries are not removed using
this command.
C9000 Series
Syntax
clear ipv6 neighbors [ipv6 address] | interface interface | vrf vrf name]
Parameters
ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specific
IPv6 neighbor.
NOTE: The :: notation specifies successive hexadecimal fields of zero.
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to clear the
neighbor corresponding to that VRF.
NOTE: If you do not specify this option, the neighbors in the default VRF are
cleared.
interface
interface
To remove all neighbor entries learned on a specific interface, enter the keyword
interface then the interface type and slot/port or number information of the
interface:
Enter one of the following keywords with slot/port or number to clear information
about the IPv6 neighbors learned on the specified interface:
● For a 1–Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information
976 IPv6 Basics