Administrator Guide

::/0 - 00:00:00:00:00:00 CP 0 0
2::/64 ::, Te 10/1 00:00:00:00:00:00 CP 0 0
2::3/128 ::1 00:00:00:00:00:00 CP 0 0
fe80::/10 ::, Nu 0 00:00:00:00:00:00 BLK HOLE 0 0
fe80::2ff:eff:fe3f:a1/128 ::1 00:00:00:00:00:00 CP 0 0
show ipv6 flowlabel-zero
Display the flow label zero setting.
C9000 Series
Syntax
show ipv6 flowlabel-zero
Default Disabled
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 nd dad attempts — Configure system to set the flow label field in the packets to zero.
show ipv6 interface
Display the status of interfaces configured for IPv6.
C9000 Series
Syntax
show ipv6 interface interface [linecard slot-id] [brief] [configured]
[loopback interface-number] [managementethernet slot/port] [port-channel
number][tengigabitethernet slot | slot/port] [fortyGigE slot | slot/port]
[tunnel tunnel-id] [vlan vlan-id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
● For a Loopback interface, enter the keyword Loopback then a number from 0
to 16383.
● For the Null interface, enter the keyword null then zero (0).
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
IPv6 Basics 993