Administrator Guide

Table 21. show interface pfc summary Command Description (continued)
Fields Description
PFC TLV Statistics: Error pkts Number of PFC error packets received.
PFC TLV Statistics: Pause Tx pkts Number of PFC pause frames transmitted.
PFC TLV Statistics: Pause Rx pkts Number of PFC pause frames received
The following example shows the show interface pfc statistics command.
Dell#show int tengigabitethernet 0/2 pfc statistics
Interface TenGigabitEthernet 0/2
Interface Priority Rx XOFF Frames Rx Total Frames Tx Total Frames
------------------------------------------------------------------------
Te 0/2 P0 0 0 0
Te 0/2 P1 0 0 0
Te 0/2 P2 0 0 0
Te 0/2 P3 0 0 0
Te 0/2 P4 0 0 0
Te 0/2 P5 0 0 0
Te 0/2 P6 0 0 0
Te 0/2 P7 0 0 0
The following example shows the show interface ets summary command.
Dell#show interface tengigabitethernet 1/3 ets summary
Interface TenGigabitEthernet 1/3
Max Supported TC Groups is 3
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 - -
1 0,1,2 100% ETS
2 3 0 % SP
3 4,5,6,7 0 % SP
4 - -
5 - -
6 - -
7 - -
Remote Parameters :
-------------------
Remote is disabled
Local Parameters :
------------------
Local is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 - -
1 0,1,2 100% ETS
2 3 0 % SP
3 4,5,6,7 0 % SP
4 - -
5 - -
6 - -
7 - -
Oper status is init
ETS DCBx Oper status is Down
Data Center Bridging (DCB)
271