Administrator Guide

ERROR: Fan speed variation failed for tray[1]
FAN TRAY[1] FAN 0 Controller Speed Test FAIL
ERROR: Tray[1] fan[1] speed 57% is out of expected range [80-100%]
ERROR: Fan speed variation failed for tray[1]
FAN TRAY[1] FAN 1 Controller Speed Test FAIL
ERROR: Tray[1] fan[2] speed 56% is out of expected range [80-100%]
ERROR: Fan speed variation failed for tray[1]
FAN TRAY[1] FAN 2 Controller Speed Test FAIL
ERROR: Tray[1] fan[3] speed 57% is out of expected range [80-100%]
ERROR: Fan speed variation failed for tray[1]
FAN TRAY[1] FAN 3 Controller Speed Test FAIL
ERROR: Tray[2] fan[0] speed 57% is out of expected range [80-100%]
ERROR: Fan speed variation failed for tray[2]
FAN TRAY[2] FAN 0 Controller Speed Test FAIL
ERROR: Tray[2] fan[1] speed 57% is out of expected range [80-100%]
ERROR: Fan speed variation failed for tray[2]
FAN TRAY[2] FAN 1 Controller Speed Test FAIL
ERROR: Tray[2] fan[2] speed 56% is out of expected range [80-100%]
ERROR: Fan speed variation failed for tray[2]
FAN TRAY[2] FAN 2 Controller Speed Test FAIL
ERROR: Tray[2] fan[3] speed 56% is out of expected range [80-100%]
ERROR: Fan speed variation failed for tray[2]
FAN TRAY[2] FAN 3 Controller Speed Test FAIL
fanCntrlSpeedTest ........................................... FAIL
fanTrayEepromAccessTest ..................................... PASS
Starting test: i2cTest ......
ERROR: ioctl: "psu0" op(1)=READ WITH STOP bus=7 address=0x70 offset=0xd7 length=1
ERROR: ioctl: "psu1" op(1)=READ WITH STOP bus=8 address=0x71 offset=0xd7 length=1
ERROR: ioctl: "psu2" op(1)=READ WITH STOP bus=9 address=0x72 offset=0xd7 length=1
ERROR: ioctl: "lm0" op(1)=READ WITH STOP bus=17 address=0x42 offset=0 length=1
ERROR: ioctl: "lm2" op(1)=READ WITH STOP bus=19 address=0x44 offset=0 length=1
ERROR: ioctl: "lm3" op(1)=READ WITH STOP bus=20 address=0x45 offset=0 length=1
ERROR: ioctl: "lm6" op(1)=READ WITH STOP bus=23 address=0x48 offset=0 length=1
ERROR: ioctl: "lm7" op(1)=READ WITH STOP bus=24 address=0x49 offset=0 length=1
ERROR: ioctl: "lm8" op(1)=READ WITH STOP bus=25 address=0x4a offset=0 length=1
ERROR: ioctl: "lm9" op(1)=READ WITH STOP bus=26 address=0x4b offset=0 length=1
i2cTest ..................................................... FAIL
Starting test: interruptStatusRegister ......SMC_SUS0_STA1 Interrupt Status : PASS
interruptStatusRegister ..................................... PASS
Starting test: psuEepromAccessTest ......
PSU [0] Eeprom Access Test FAIL
PSU [1] Eeprom Access Test FAIL
PSU [2] Eeprom Access Test FAIL
psuEepromAccessTest ......................................... FAIL
rtcTest ..................................................... PASS
sataSsdTest ................................................. PASS
Starting test: ssdFlashFileSystemStressTest ....../dev/rwd0k: 3 files, 20398 free (10199
clusters)
Iteration 1 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 2 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 3 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 4 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 5 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 6 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 7 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 8 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 9 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 10 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 11 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 12 - File System Check passed
/dev/rwd0k: 3 files, 20398 free (10199 clusters)
Iteration 13 - File System Check passed
298
Debugging and Diagnostics