Administrator Guide

ip address 10.11.1.1/24
no shutdown
!
Dell(conf-if)#
Configuring Static Routes
A static route is an IP address that you manually configure and that the routing protocol does not learn, such as open shortest
path first (OSPF). Often, static routes are used as backup routes in case other dynamically learned routes are unreachable.
You can enter as many static IP addresses as necessary.
To configure a static route, use the following command.
● Configure a static IP address.
CONFIGURATION mode
ip route ip-address mask {ip-address | interface [ip-address]} [distance] [name
description] [permanent] [tag tag-value]
Use the following required and optional parameters:
○ ip-address: enter an address in dotted decimal format (A.B.C.D).
○ mask: enter a mask in slash prefix-length format (/X).
○ interface: enter an interface type then the slot/port information.
○ distance: the range is from 1 to 255. (optional)
○ name: enter the keyword name and the description of the IPv4 static route configuration. (optional)
○ permanent: keep the static route in the routing table (if you use the interface option) even if you disable the
interface with the route. (optional)
○ tag tag-value: the range is from 1 to 4294967295. (optional)
To view the configured routes, use the show ip route static command.
Dell#show ip route static
Destination Gateway Dist/Metric Last Change
----------- ------- ----------- -----------
S 2.1.2.0/24 Direct, Nu 0 0/0 00:02:30
S 6.1.2.0/24 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.2/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.3/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.4/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.5/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.6/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.7/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.8/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.9/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.10/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.11/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.12/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.13/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.14/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.15/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.16/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 6.1.2.17/32 via 6.1.20.2, Te 5/0 1/0 00:02:30
S 11.1.1.0/24 Direct, Nu 0 0/0 00:02:30
Direct, Lo 0
--More--
The system installs a next hop that is on the directly connected subnet of current IP address on the interface (for example, if
interface gig 0/0 is on 172.31.5.0 subnet, the system installs the static route).
IPv4 Routing
457