Administrator Guide

Pre-requisites

To configure a secure connection from the switch to the syslog server:

1. On the switch, enable the SSH server

Dell(conf)#ip ssh server enable

2. On the syslog server, create a reverse SSH tunnel from the syslog server to the switch, using following syntax:

ssh -R <remote port>:<syslog server>:<syslog server listen port> user@remote_host -nNf

In the following example the syslog server IP address is 10.156.166.48 and the listening port is 5141. The switch IP

address is 10.16.131.141 and the listening port is 5140

ssh -R 5140:10.156.166.48:5141 admin@10.16.131.141 -nNf

3. Configure logging to a local host. locahost is “127.0.0.1” or “::1”.

If you do not, the system displays an error when you attempt to enable role-based only AAA authorization.

Dell(conf)# logging localhost tcp port

Dell(conf)#logging 127.0.0.1 tcp 5140

Switch Management