Administrator Guide

Table 109. MIB Objects for Copying Configuration Files via SNMP (continued)
MIB Object OID Object Values Description
copySrcFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.3
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
6 = usbflash
Specifies the location of
source file.
● If copySrcFileLocation is
FTP or SCP, you must
specify
copyServerAddress,
copyUserName, and
copyUserPassword.
copySrcFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.4 Path (if the file is not in the
current directory) and
filename.
Specifies name of the file.
● If copySourceFileType is
set to running-config or
startup-config,
copySrcFileName is not
required.
copyDestFileType .1.3.6.1.4.1.6027.3.5.1.1.1.1.5
1 = Dell Networking OS file
2 = running-config
3 = startup-config
Specifies the type of file to
copy to.
● If copySourceFileType is
running-config or startup-
config, the default
copyDestFileLocation is
flash.
● If copyDestFileType is a
binary, you must specify
copyDestFileLocation and
copyDestFileName.
copyDestFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.6
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Specifies the location of
destination file.
● If copyDestFileLocation is
FTP or SCP, you must
specify
copyServerAddress,
copyUserName, and
copyUserPassword.
copyDestFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 Path (if the file is not in the
default directory) and
filename.
Specifies the name of
destination file.
copyServerAddress .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 IP Address of the server. The IP address of the server.
● If you specify
copyServerAddress, you
must also specify
copyUserName and
copyUserPassword.
copyUserName .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 Username for the server. Username for the FTP, TFTP,
or SCP server.
● If you specify
copyUserName, you must
also specify
copyUserPassword.
copyUserPassword .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 Password for the server. Password for the FTP, TFTP,
or SCP server.
920 Simple Network Management Protocol (SNMP)