Users Guide

Feature/Capability Support Status for Default VRF Support Status for Non-default VRF

Layer 2 ACLs on VLANs Yes No

FEED Yes No

Layer 2 QoS Yes Yes

Support for storm-control (broadcast and

unknown-unicast)

Yes No

sFlow Yes No

VRRP on physical and logical interfaces Yes Yes

Secondary IP Addresses Yes No

Following IPv6 capabilities No

Basic Yes No

OSPFv3 Yes No

ISIS Yes No

BGP Yes No

ACL Yes Yes

Multicast Yes No

NDP Yes No

RAD Yes No

Ingress/Egress Storm-Control (per-

interface/global)

Yes No

DHCP

DHCP requests are not forwarded across VRF instances. The DHCP client and server must be on the same VRF instance.

VRF Conguration

The VRF conguration tasks are:

1 Enabling VRF in Conguration Mode

2 Creating a Non-Default VRF

3 Assign an Interface to a VRF

You can also:

• View VRF Instance Information

• Connect an OSPF Process to a VRF Instance

• Congure VRRP on a VRF

Load VRF CAM

VRF is enabled by default on the switch. To load the VRF CAM prole, enter the feature vrf command in global conguration mode.

1030

Virtual Routing and Forwarding (VRF)