Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch
361362363364365366367368369370
• The maximum number of FIP snooping sessions supported per ENode server is 32 by default and the maximum number of sessions you
can congure is 64. To increase the maximum number of sessions to 64, use the fip-snooping max-sessions-per-enodemac
command.
• The maximum number of FCFs supported per FIP snooping-enabled VLAN is twelve.
• The maximum number of FCoE VLANs supported on the switch is eight.
• The maximum number of FIP snooping sessions (including NPIV sessions) supported per ENode server is 16
• Links to other FIP snooping bridges on a FIP snooping-enabled port (bridge-to-bridge links) are not supported on the switch.
• p-snooping port-mode fcf/fcoe-trusted CLI is not allowed on cascade, extended ports, or a LAG which contains these ports.
• p-snooping enable/p-snooping fc-map CLIs are not allowed on VLAN interfaces which has cascade or extended port as one of its
members either directly or indirectly via LAG.
Conguring FIP Snooping
You can enable FIP snooping globally on all FCoE VLANs on a switch or on an individual FCoE VLAN.
By default, FIP snooping is disabled.
To enable FCoE transit on the switch and congure the FCoE transit parameters on ports, follow these steps.
1 Congure FCoE.
To congure FCoE transit, refer to the FCoE Transit Conguration Example
NOTE: DCB/DCBx is enabled when either of these congurations is applied.
2 Save the conguration on the switch.
EXEC Privilege mode.
write memory
3 Reload the switch to enable the conguration.
EXEC Privilege mode.
reload
After the switch is reloaded, DCB/DCBx is enabled.
4 Enable the FCoE transit feature on a switch.
CONFIGURATION mode.
feature fip-snooping
5 Enable FIP snooping on all VLANs or on a specied VLAN.
CONFIGURATION mode or VLAN INTERFACE mode.
fip-snooping enable
6 Congure the port for bridge-to-FCF links.
INTERFACE mode or CONFIGURATION mode
fip-snooping port-mode fcf
NOTE
: To disable the FCoE transit feature or FIP snooping on VLANs, use the no version of a command; for example, no
feature fip-snooping or no fip-snooping enable.
370 FCoE Transit