Users Guide
• Clear the counters used in the show interface commands for all VRRP groups, VLANs, and physical interfaces or selected ones.
Without an interface specied, the command clears all interface counters.
EXEC Privilege mode
clear counters [interface] [vrrp [vrid] | learning-limit]
(OPTIONAL) Enter the following interface keywords and slot/port or number information:
• For a loopback interface, enter the keyword loopback then a number from 0 to 16383.
• For a Port Channel interface, enter the keywords port-channel then a number.
• For the management interface, enter the keyword ManagementEthernet 0/0. The slot number is 0; the port number is 0.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
• For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE then the pe-id / stack-unit / port-id
where pe-id is a port-extender ID number from 0 to 255; unit-number is a PE stack-unit number from 0 to 7; port-id is a port
number from 1 to 48.
• For a VLAN, enter the keyword vlan then a number.
• (OPTIONAL) To clear statistics for all VRRP groups congured, enter the keyword vrrp. Enter a number from 1 to 255 as the
vrid.
• (OPTIONAL) To clear unknown source address (SA) drop counters when you congure the MAC learning limit on the interface,
enter the keywords learning-limit.
Example of the clear counters Command
When you enter this command, conrm that you want to clear the interface counters for the specied interface.
Dell#clear counters te 0/0
Clear counters on TengigabitEthernet 0/0 [confirm]
Dell#
Interfaces
469