Users Guide

SW and CAM ACL Validation error state.
Dell#show pe brief
-- Port Extenders Information --
----------------------------------------------------------
PE-id Status Stack-size Type System-MAC
----------------------------------------------------------
200 offline 1 C1048P f8:b1:56:00:02:8a
Dell#show pe 200
Codes: A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present,
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
PE-ID assigned: 200
Status: offline
System Mac: f8:b1:56:00:02:8a
PE Up Time: 00:00:00
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 0/22(A),Te 0/23(A)
Cascade LAG: Po 458(Up)
------------------------------------------------------------------------
Stack-id Status Reason Type UnitMac No. of Ports
------------------------------------------------------------------------
2 error SVM C1048P 00:00:00:00:00:00 52
Dell#
Dell#show pe errors
PE-id: 200
PE MAC: f8:b1:56:00:02:8a
PE Unit Errors:
PE Unit:2, Error Reason: SW Mismatch
Dell#
The PE goes for an auto-synch to get upgraded to the version that matches the CB. Once synched, the PE comes up online.
Dell#Apr 3 05:52:49: %RPM1-P:CP %DOWNLOAD-6-UPGRADE: PE 200 auto upgrade result - upgrade
success, initiating reset.
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/22
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/23
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Po 458
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/23
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is detected on cascade
port:TenGigabitEthernet 0/22.
Apr 3 05:54:57: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Po 458
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is detected on cascade
port:TenGigabitEthernet 0/23.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UNIT_UP: PE:200 Unit:2 Unit MAC:f8:b1:56:00:02:8a is
operationally up.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UP: PE:200 MAC:f8:b1:56:00:02:8a is operationally up.
Apr 3 05:55:06: %RPM1-P:CP %POEMGR-5-POE_CONTROLLER_FW_MISMATCH: POE Controller FW Version
mismatch reported in port extender 200 stack unit 2
Apr 3 00:41:00: %PE200-C1048P:2 %POLLMGR-2-USER_FLASH_STATE: USB flash disk missing in
'usbflash:'
Apr 3 00:41:00: %PE200-UNIT2-U:CP %RAM-6-ELECTION_ROLE: Stack-unit 2 is transitioning to
Management Stack-unit.
Apr 3 00:41:00: %PE200-UNIT2-M:CP %CHMGR-5-CHMCANNOTDO: Unable to read RPM 0 mfg eeprom -
not programmed?
Apr 3 00:41:00: %PE200-UNIT2-M:CP %CHMGR-5-CHMCANNOTDO: Unable to read chassis mfg eeprom -
not programmed?
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-STACKUNIT_DETECTED: stack-unit 2 present
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-CHECKIN: Checkin from stack-unit 2 (type C1048P,
748
Port Extenders (PEs)