Administrator Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series
E-Series Original command.
Example
Dell#show debugging
Generic IP:
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
TenGigabitEthernet 0/0-3,5-6,10-11,20
TenGigabitEthernet 1/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
TenGigabitEthernet 1/0,2,4,6,8,10,12,14,16
DHCP Server:
DHCP server packet debugging on
Dell#
show environment
View system component status (for example, fan, power supply, and temperature).
C9000 Series
Syntax
show environment [all | fan | linecard slot-id | media | pe pe-id | pem |
thermal-sensors]
From a PE console, use show environment [all | fan | pem | stack-unit | thermal-
sensors]
thermal-sensors Enter the keyword thermal-sensors to display only temperatures and thresholds for the system and
switching core, and port modules.
Parameters
all Enter the keyword all to view all components.
fan Enter the keyword fan to view information on the fans. The output of this command is
chassis dependent.
linecard Enter the keyword linecard to view information on the linecard environment status.
pe pe-id Enter the keyword pe and the port extender (PE) ID to display environment status for
PE. The PE ID range is from 0 to 255.
NOTE: The pe option is only available when the extended bridge feature is
enabled.
pem Enter the keyword pem to view only information on power entry modules.
stack-unit Enter the keyword stack-unit to view information on stack-unit.
media Enter the keyword media to view information on optical media transceivers.
thermal-sensors Enter the keyword thermal-sensors to display only temperatures and thresholds for
the system and switching core, and port modules.
102 Control and Monitoring