Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1031

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.1) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.5.1.0 Introduced on the E-Series.

Usage Information The system counts the SA messages originated by itself and those messages received from the MSDP peers.

When the total SA messages reach this limit, the subsequent SA messages are dropped (even if they pass RPF

checking and policy checking).

If the total number of SA messages is already larger than the limit when this command is applied, those SA

messages that are already in the system continue to be accepted. To enforce the limit in such situation, use the

clear ip msdp sa-cache command.

Commands

ip msdp peer — configures the MSDP peer.

clear ip msdp peer — clears the MSDP peer.

show ip msdp — displays the MSDP information

ip msdp shutdown

Administratively shut down a configured MSDP peer.

C9000 Series

Syntax

ip msdp shutdown {peer address}

Parameters

peer address

Enter the peer address in a dotted decimal format (A.B.C.D.).

Defaults Not configured.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.