Administrator Guide

1 C1048P-PWR-AC NA 001ABCD001 00A US-001YHN-17972-38N-007A 001 NA
NA
1 C1048P-FAN N/A N/A N/A
N/A
* - Management Unit
Software Protocol Configured
---------------------------
LLDP
Related
Commands
• show interfaces — displays the interface configuration.
• show interfaces transceiver — displays the physical status and operational status of an installed transceiver.
The output also displays the transceiver’s serial number.
show linecard
Display the linecard(s) status.
C9000 Series
Syntax
show linecard [slot-id [brief] | all]
Parameters
slot-id (OPTIONAL) Enter a slot ID to view information on the line card in that slot. For the
C9010, the range is from 0 to 11. For the C-Series, the range is 0 to 7. For the E-Series,
the range is 0 to 13 on the E1200, 0 to 6 on the E600, and 0 to 5 on the E300.
all (OPTIONAL) Enter the keyword all to view a table with information on all present line
cards
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of line card
information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
show
linecard
output Field
Description
Line card Displays the line card slot number (only listed in the show linecard all command
output).
Status Displays the line card’s status.
Next Boot Displays whether the line card is to be brought online at the next system reload.
Required Type Displays the line card type configured for the slot. The Required Type and Current Type
must match. If they do not match, use the linecard command to reconfigure the line
card type.
Current Type Displays the line card type installed in the slot. The Required Type and Current Type must
match. If they do not match, use the linecard command to reconfigure the line card
type.
106 Control and Monitoring