Administrator Guide

rp Enter the keyword rp to view IPC message statistics on the Route Processor CPU.
lp slot-id Enter the slot ID of the line card for which you want to view IPC message statistics. The
range of switch slot IDs is from 0 to 11. Enter linecard all to view IPC statistics for
all line cards.
pe pe-id Enter the keyword pe to view IPC message statistics on the port extender (PE) .The PE
ID range is from 0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
Defaults Display IPC message statistics on all switch CPUs: Control Processor, Route Processor, and line cards.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage Information
Important Points:
• Use show processes ipc commands only when you are working directly with Dell Technical Support to
troubleshoot a problem.
Example: show
processes ipc
send-stats
Dell#show processes ipc send-stats rp
IPC Send Statistics on RP
Memory Used by Send DB on this processor: 1451880 bytes
SeqNo - Last sent guaranteed IPC pkt sequence no from this source to
destination
Success - No of successfull guaranteed IPC packets sent from source to
destination
1st-R - No of first retry attempts
2nd-R - No of second retry attempts
Fails - No of guaranteed IPC pkts that could not be transmitted
RTT(ms) - Avg. Round Trip time for guaranteed IPC packets in millisecs
NonG-S - No of non-guaranteed IPC pkts succesfully sent. This does not
include those sent by SWP
NonG-F - No of non-guaranteed IPC pkt transmission failures
SWP-S - No of non-guaranteed SWP IPC pkts succesfully sent
SWP-F - No of non-guaranteed SWP IPC pkt transmission failures
Source-> Destination SeqNo Success 1st-R 2nd-R Fails
RTT(ms) NonG-S NonG-F SWP-S SWP-FIPC: 1 ->
TME: 1 1561 3 0 0 0 2
0 0 0 0
IPC: 1 -> IPC: 0 37025 0 0 0
0 0 1107 0 0 0
EVENTLOGAGENT: 1 -> TME: 1 18888 0 0 0
0 0 1 0 0 0
EVENTLOGAGENT: 1 -> TME: 1 18888 0 0 0
116 Control and Monitoring