Administrator Guide
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information
You can configure an arbitrary value in the IP address for each router. However, each router ID must be unique.
If this command is used on an OSPFv3 process that is already active (has neighbors), all the neighbor adjacencies
are brought down immediately and new sessions are initiated with the new router ID.
Related
Commands
clear ipv6 ospf process – resets an OSPFv3 router process.
show crypto ipsec policy
Display the configuration of IPsec authentication and encryption policies.
C9000 Series
Syntax
show crypto ipsec policy [name name]
Parameters
name
name
(OPTIONAL) Displays configuration details about a specified policy.
Defaults None.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.0 Introduced on the E-Series TeraScale.
8.3.19.0 Introduced on the S4820T.
Usage Information
The show crypto ipsec policy command output displays the AH and ESP parameters configured in IPsec
security policies, including the SPI number, keys, and algorithms used.
When configured in a helper-reject role, an OSPFv3 router ignores the Grace LSAs that it receives from a
restarting OSPFv3 neighbor.
1160 Open Shortest Path First (OSPFv2 and OSPFv3)