Administrator Guide
Csp Sess Status : UP
Active CB : YES
Uplink LAG : Port-channel 257
LAG Admin Status : UP
LAG Oper Status : UP
--------------------------------
Status Reason RPM-Id PE-Id
--------------------------------
Online - 0 255
Usage Information
Use the show control-bridge status command output information to debug the connectivity issues
between the control bridge and port extender.
show system
Display the status of a specific stack-unit from the port extender (PE) console.
Syntax
show system [brief | stack-unit unit-id | stack-ports [status | topology]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of system information.
stack-unit
unit-id
(OPTIONAL) Enter the keywords stack-unit then the stack unit number for
information. The stack-unit number range is from 0 to 7.
stack-ports
status
|
topology
(OPTIONAL) Enter the keywords stack-ports for information about the status or
topology of the stack ports.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload mode. To display Reload
mode, use the show reload-type command. Modified the show system stack-
unit command output to support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash field displays the code level for boot code 2.8.1.1 and newer, while older
boot codes display as "Present".
7.7.1.0 Added Master Priority field.
7.6.1.0 Introduced on the S-Series.
Example (PE
Console)
Dell#show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
1176 PE Console Commands