Administrator Guide

Version Description
7.8.1.0 Introduced on the S-Series.
Example
Dell#show ip pim rp
Group RP
224.2.197.115 165.87.20.4
224.2.217.146 165.87.20.4
224.3.3.3 165.87.20.4
225.1.2.1 165.87.20.4
225.1.2.2 165.87.20.4
229.1.2.1 165.87.20.4
229.1.2.2 165.87.20.4
Dell#
Example
(Mapping)
Dell#show ip pim rp mapping
PIM Group-to-RP Mappings
Group(s): 224.0.0.0/4, Static
RP: 50.40.4.4, v2
Dell#
Example
(Address)
Dell#show ip pim rp 229.1.2.1
Group RP
229.1.2.1 165.87.20.4
show ip pim snooping interface
Display information on VLAN interfaces with PIM-SM snooping enabled.
C9000 Series
Syntax
show ip pim snooping interface [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about a specified VLAN configured
for PIM-SM snooping. The valid VLAN IDs range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.4.1.1 Introduced on the E-Series ExaScale.
Usage Information The following describes the show ip pim snooping interface commands shown in the following
example.
Field Description
Interface Displays the VLAN interfaces with PIM-SM snooping enabled.
PIM-Sparse Mode (PIM-SM) 1233