Administrator Guide

Field Description
Ver/Mode Displays the PIM version number for each VLAN interface with PIM-SM snooping
enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of neighbors learned through PIM-SM snooping on the interface.
DR Prio Displays the Designated Router priority value configured on the interface (ip pim dr-
priority command).
DR Displays the IP address of the Designated Router for that interface.
Example (#2)
Dell#show ip pim snooping interface
Interface Ver Nbr DR DR
Count Prio
Vlan 2 v2 3 1 165.87.32.2
show ip pim summary
View information about PIM-SM operation.
C9000 Series
Syntax
show ip pim summary [vrf vrf-name]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure this
setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default
VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON. Added support for VRF.
9.5(0.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.1 Support for the display of PIM-SM snooping status was added on E-Series ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Example
Dell# show ip pim summary
1234 PIM-Sparse Mode (PIM-SM)