Administrator Guide

show running-config common
Use show running-config common to view the common configurations in the local system.
C9000 Series
Syntax
show running-config common
Default None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the C9010.
Usage Information Use the show running-config common command to view only the common configurations in the local
system.
Example
Dell#show running-config common
!
logging coredump
!
protocol lldp
!
feature extended-bridge
!
pe provision 10
cascade interface TenGigabitEthernet 0/2
cascade interface TenGigabitEthernet 0/2 peer
!
pe provision 11
cascade interface TenGigabitEthernet 0/5
cascade interface TenGigabitEthernet 0/5 peer
!
interface peGigE 255/0/1
shutdown
!
--More--
show config
Display the configuration in the batch mode.
C9000 Series
Syntax
show config [common | user | local]
Parameters
common Displays the common configuration in the batch mode.
user Displays the configuration done in the batch mode in an order entered by the user.
local Displays the local configuration in the batch mode.
Command Modes CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1262 Port Extenders (PE)