Administrator Guide

The following examples show power management mode, “class” configured for the port extender 255.
Example
Dell(conf)#power inline mode pe 0 stack-unit 0 static
Dell#show power inline pe 0 stack-unit 0
Global inline power Threshold : 99
Power Reserved for inline Power: 841W
Total Inline Power Consumed: 0W
Remaining inline power Available: 841W
Power Management Mode: Static
Interface Inline Power Inline Power Class Device PoE Port
LLDP
Max / Alloc Consumed Type Priority
Support
(Watts) (Watts)
------------- ------------ ------------ ------- ------ --------
------
PeGi 0/0/0 30.00/0.00 0.00 NO_PD -
low 0
power inline restore pe
Enable the temporarily suspended PoE power supply to all the ports in a port extender unit.
C9000 Series
Syntax
power inline restore pe pe-id stack-unit unit number
Parameters
pe pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255.
stack-unit unit
number
Enter the keyword stack-unit and the stack-unit number. Range is from 0 to 7.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
The power inline restore pe command enables or restores the temporarily suspended PoE power supply
to all the ports on a port extender unit.
Example
Dell#power inline restore pe 1 stack-unit 2
power inline suspend pe
Disable PoE power supply to all the ports in a port extender unit temporarily.
C9000 Series
Syntax
power inline suspend pe pe-id stack-unit unit number
1280 Port Extenders (PE)