Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1291

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the C-Series and S-Series.

Usage Information The list of secondary VLANs can be:

• Specified in comma-delimited or hyphenated-range format.

• Specified with this command even before they have been created.

• Amended by specifying the new secondary VLAN to be added to the list.

Commands

• private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.

• show interfaces private-vlan — displays the type and status of the PVLAN interfaces.

• show vlan private-vlan — displays the PVLANs and/or interfaces that are part of a PVLAN.

• switchport mode private-vlan — sets PVLAN mode of the selected port.

show interfaces private-vlan

Display type and status of PVLAN interfaces.

C9000 Series

Syntax

show interfaces private-vlan [interface interface]

Parameters

interface

(OPTIONAL) Enter the keyword interface and the interface type, slot/port numbers

or port-channel number to specify the port(s) for which you want to display PVLAN

information. Enter only a slot ID to display the PVLAN status for all ports on a line card.

The valid values are:

• port-channel port-channel-number

• tengigabitethernet [slot-id | slot/port]

• fortygigE [slot-id | slot/port]

• peGigE[pe-id/stack-unit/port

Defaults none

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.