Administrator Guide

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#sh system linecard 6 fanout configured
Configured fan out ports in linecard 6
Configured Present
0 0
4 4
8 8
12 12
16 16
20 20
Dell#sh system linecard 6 fanout count
Fan out ports in linecard 6
Configured = 6
Present = 6
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to troubleshoot switch
operation.
C9000 Series
Syntax
show tech-support [linecard slot-id | page | pe pe-id stack-unit unit-number]
From a PE console, use show tech-support stack-unit unit-number page
Parameters
linecard slot-id Enter the slot ID of the line card for which you want to collect information for tech
support. The range of slot IDs is from 0 to 11. Enter linecard all to collect
troubleshooting information on all line cards.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line of text.
pe pe-id (OPTIONAL) Enter the keyword pe and the port extender(PE) ID. The PE ID range is
from 0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
stack-unit unit-
number
Enter the keyword stack-unit and the unit number. The stack-unit range is from 0 to
7.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
Control and Monitoring 131