Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1311

match mac vlan

Configure a match criterion for a class map based on VLAN ID.

C9000 Series

Syntax

match mac vlan number

Parameters

number

Enter the VLAN ID. The range is from 1 to 4094.

Defaults none

Command Modes CLASS-MAP

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced.

Usage Information To access this command, enter the class-map command. You can match against only one VLAN ID.

Commands

class-map — identifies the class map.

policy-aggregate

Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS policy is part of the policy map (input/output)

applied on an interface.

C9000 Series

Syntax

policy-aggregate qos-policy-name

To remove a policy aggregate configuration, use the no policy-aggregate qos-policy-name command.