Administrator Guide

Wred yellow 1
Wred green 1
show qos statistics
View QoS statistics.
C9000 Series
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
wred-profile
interface
Enter the keywords wred-profile and optionally one of the following keywords and
slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40–Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
interface Enter one of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40–Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.1 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
In a dual homing setup, you can use this command only from the primary VLT peer.
Example
DELL#show qos statistics peGigE 0/1/1
Interface peGigE 0/1/1
Queue# Matched Pkts
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
Quality of Service (QoS) 1335