Administrator Guide

Defaults None
Command Modes EXEC Privilege
Command History
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series, E-Series, S25 and S50.
Usage Information Use the show util-threshold memory command to display the memory utilization thresholds used to send
SNMP traps. When switch CPUs exceed the configured (high or low) memory percentage to process packets or
data, a threshold notification is sent as an SNMP trap. To reconfigure the currently configured values, use the
util-threshold memory command.
Example
Dell#show util-threshold memory
Processor High Low
================================
CP 92 82
RP 92 82
LP 0 92 82
LP 1 92 82
LP 2 92 82
LP 3 92 82
LP 4 92 82
LP 5 92 82
LP 6 92 82
LP 7 92 82
LP 8 92 82
LP 9 92 82
LP 10 92 82
LP 11 92 82
PE 92 82
Related
Commands
• util-threshold mem – Configure memory utilization thresholds.
• util-threshold cpu – Configure CPU utilization thresholds.
show version
Display the current Dell Networking OS version information on the system.
C9000 Series
Syntax
show version [all |[pe pe-id]
From a PE console, use show version to view the software version information.
Parameters
all Enter the keyword all to view all components.
pe pe-id Enter the keyword pe and the port extender (PE) ID to view show version output for a
specific PE. The PE ID range is from 0 to 255.
NOTE: The pe option is only available when the extended bridge feature is
enabled.
.
Command Modes EXEC Privilege
144 Control and Monitoring