Administrator Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information Debug information includes details for key-exchange, authentication, and established session for each connection.
ip scp topdir
Identify a location for files used in secure copy transfer.
C9000 Series
Syntax
ip scp topdir directory
To return to the default setting, use the no ip scp topdir command.
Parameters
directory Enter a directory name.
Defaults The internal flash (flash:) is the default directory.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information To configure the switch as an SCP server, use the ip ssh server command.
Related
Commands
ip ssh server — enables the SSH and SCP server on the switch.
Security 1441