Administrator Guide

Copyright (c) 1999-2015 by Dell Inc. All Rights Reserved.
Build Time: Mon Jun 22 06:00:00 2015
Build Path: /build/build01/SW/SRC
Dell Networking OS uptime is 1 hour(s), 29 minute(s)
System image file is "system://B"
System Type: C1048P
Control Processor: Broadcom 56340 (ver A0) with 1 Gbytes (1073741824 bytes)
of memory, cores(s) 1.
16G bytes of boot flash memory.
2 48-port GE (VE)
96 GigabitEthernet/IEEE 802.3 interface(s)
Example: show
version (PE
Console)
Dell#show version
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 1-0(0-4092)
Copyright (c) 1999-2015 by Dell Inc. All Rights Reserved.
Build Time: Thu Jun 25 09:00:00 2015
Build Path: /build/build01/SW/SRC
Dell Networking OS uptime is 2 week(s), 0 day(s), 3 hour(s), 35 minute(s)
System image file is "system://A"
System Type: C1048P
Control Processor: Broadcom 56340 (ver A0) with 1 Gbytes (1073741824 bytes)
of memory, core(s) 1.
16G bytes of boot flash memory.
1 48-port GE (VE)
48 GigabitEthernet/IEEE 802.3 interface(s)
telnet
Connect through Telnet to a server. The Telnet client and server in the Dell Networking OS support IPv4 and IPv6 connections. You can
establish a Telnet session directly to the router or a connection can be initiated from the router.
C9000 Series
Syntax
telnet {host | ip-address | ipv6-address prefix-length | vrf vrf instance name}
[/source-interface]
Parameters
host Enter the name of a server.
ip-address Enter the IPv4 address in dotted decimal format of the server.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format then the prefix length in the /x format. The
range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
source-interface (OPTIONAL) Enter the keywords /source-interface then the interface information
to include the source interface. Enter the following keywords and slot/port or number
information:
• For a Loopback interface, enter the keyword loopback then a number from zero (0)
to 16383.
• For the Null interface, enter the keyword null then 0.
• For a Port Channel interface, enter the keyword port-channel then a number. The
range is from 1 to 128.
Control and Monitoring 147