Administrator Guide

show protocol-tunnel
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
C9000 Series
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display information for the
one VLAN. The range is from 1 to 4094.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series, E-Series and E-Series ExaScale.
7.4.1.0 Introduced
Example
Dell#show protocol-tunnel
VLAN Protocols Rate-limit(Kbps) Interface
4001 STP,PVST - Te 1/17 Te 1/19
4002 STP,PVST - Te 1/16 Te 1/18
Dell#
Dell#show protocol-tunnel vlan 4001
VLAN Protocols Rate-limit(Kbps) Interface
4001 STP,PVST - Te 1/17 Te 1/19
Example (Specific
VLAN)
Dell#show protocol-tunnel vlan 2
System Rate-Limit: 1000 Frames/second
Interface Vlan Protocol(s)
Te1/2 2 STP, PVST
Dell#
Related
Commands
show running-config — displays the current configuration.
Service Provider Bridging 1471