Administrator Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information
To clear the messages in the logging buffer from a port extender (PE) console, use the clear logging
command.
Related
Commands
show logging — displays logging settings and system messages in the internal buffer.
clear logging auditlog
Clears audit log.
C9000 Series
Syntax
clear logging auditlog
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Example
Dell(conf)#clear logging auditlog
Related
Commands
show logging auditlog — displays audit log
default logging buffered
Return to the default setting for messages logged to the internal buffer.
C9000 Series
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
1504 Simple Network Management Protocol (SNMP) and Syslog