Administrator Guide

From a PE console, useshow logging [number]
Parameters
number (OPTIONAL) Enter the number of messages displayed in the output. The range is from 1
to 65535.
history (OPTIONAL) Enter the keyword history to view only information in the Syslog history
table.
reverse (OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO (first in,
first out) order.
summary (OPTIONAL) Enter the keyword summary to view a table showing the number of
messages per type and per slot. Slots *7* and *8* represent RPMs.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Example (Partial)
Dell#show logging
Syslog logging: enabled
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 97 Messages Logged, Size (40960 bytes)
Trap logging: level informational
Logging to 172.16.1.162
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Feb 18 01:17:32: %SYSTEM:CP %SEC-5-LOGOUT: Exec session is terminated for
user admin on line vty0 ( 10.16.127.145 )
Feb 18 01:17:31: %SYSTEM:CP %IFMGR-5-ASTATE_DN: Changed interface Admin
state to down: Fo 2/0
Feb 18 01:17:24: %SYSTEM:CP %SEC-5-LOGIN_SUCCESS: Login successful for user
admin on line vty0 ( 10.16.127.145 )
Feb 18 01:17:23: %SYSTEM:CP %SEC-5-LOGOUT: Exec session is terminated for
user admin on line vty0 ( 10.16.127.145 )
Feb 18 01:17:03: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from vty0
( 10.16.127.145 )by admin
Feb 18 01:17:03: %SYSTEM:CP %IFMGR-5-ASTATE_UP: Changed interface Admin
state to up: Fo 2/0
Feb 18 01:16:57: %SYSTEM:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable
password authentication success on vty0 ( 10.16.127.145 )
Feb 18 01:16:57: %SYSTEM:CP %SEC-5-LOGIN_SUCCESS: Login successful for user
admin on line vty0 ( 10.16.127.145 )
Feb 18 00:46:18: %SYSTEM:CP %SEC-5-LOGOUT: Exec session is terminated for
user admin on line vty0 ( 10.16.127.145 )
Feb 18 00:46:17: %SYSTEM:CP %SYS-5-CONFIG_I: Configured from vty0
( 10.16.127.145 )by admin
Simple Network Management Protocol (SNMP) and Syslog
1517