Administrator Guide

Parameters
imported-bgp Enter the keyword imported-bgp to redistribute leaked routes that are learnt using the
BGP protocol.
imported-ospf Enter the keyword imported-ospf to redistribute leaked routes that are learnt using the
OSPF protocol.
imported-isis Enter the keyword imported-isis to redistribute leaked routes that are learnt using the ISIS
protocol.
route-map Enter the name of the route-map to specify the filtering criteria for imported routes.
Command Modes
CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Related
Commands
ip route-import – imports routes from another VRF.
interface management
Associate a management port with a management VRF.
C9000 Series
Syntax
interface management
To delete the association between a management port and a management VRF, use the no interface
management command.
Defaults None.
Command Modes VRF MODE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage Information
Use this command to associate a management port with a management VRF. When you execute this command,
the management ports corresponding to both the ACTIVE unit as well as the STANDBY unit are associated with
the management VRF.
Virtual Routing and Forwarding (VRF) 1651