Administrator Guide

Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
VlanFcoe : 1
VlanAclOpt : 0
show running config acl-vlan-group
Display the running configuration of ACL VLAN groups.
C9000 Series
Syntax
show running config acl-vlan-group group-name
Parameters
group-name
Display the specified ACL VLAN group (140 characters maximum).
Default None
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, Z9000 and MXL.
Examples The following sample output shows the line-by-line style display when using the show running-config acl-
vlan-group option. Note that no group or access list names are truncated.
Dell#show running-config acl-vlan-group
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
!
acl-vlan-group group2
member vlan 20
ip access-group acl2 out
Dell#
Dell#show running-config acl-vlan-group group1
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
Common MAC ACL Commands
The following commands are available within both MAC ACL modes (Standard and Extended) and do not have mode-specific options.
These commands allow you to clear, display, and assign MAC ACL configurations.
The C9000 supports both Ingress and Egress MAC ACLs.
You can apply a MAC ACL on physical, port-channel and VLAN interfaces. The permit/deny statements in the ACL determine how traffic
on an interface, VLAN members, or port-channel members is handled.
248
Access Control Lists (ACL)