Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

421

422

423

424

425

426

427

428

429

430

Parameters

ipv6-address

Enter an IPv6 address to reset neighbors belonging to that IP. Used without a qualifier,

the keyword resets all neighbors belonging to that IP.

flap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear all flap statistics

belonging to that AS or a specified address family within that IP.

ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that address family.

ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that address family.

unicast (OPTIONAL) Enter the keyword unicast to select the unicast option within the

selected address family.

multicast (OPTIONAL) Enter the keyword multicast to select the multicast option within the

selected address family. Multicast is supported on IPv4 only

soft (OPTIONAL) Enter the keyword soft to configure and activate policies without resetting

the BGP TCP session, that is, BGP Soft Reconfiguration.

NOTE: If you enter clear ip bgp ip6-address soft, both inbound and

outbound policies are reset.

in (OPTIONAL) Enter the keyword in to activate only inbound policies.

out (OPTIONAL) Enter the keyword out to activate only outbound policies.

Command Modes EXEC Privilege

Command History

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.2.1.0 Introduced on the E-Series ExaScale.

7.4.1.0 Introduced

clear ip bgp * (asterisk)

Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the

TCP connection.

C9000 Series

Syntax

clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast soft [in | out] |

soft [in | out]]

Parameters

* Enter an asterisk ( * ) to reset all BGP sessions.

ipv4 multicast soft

[in | out]

(OPTIONAL) This keyword sequence sets options within the a specified IPv4 address

family.

ipv6 unicast soft