Administrator Guide

Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp ipv6 dampening
View information on IPv6 routes being dampened.
C9000 Series
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast dampening command.
Parameters
in (OPTIONAL) Enter the keyword in to view only information on inbound dampened
routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound dampened
routes.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information Enter the no debug ip bgp command to remove all configured debug commands for BGP.
Related
Commands
show ip bgp dampened-paths – View BGP dampened routes.
debug ip bgp ipv6 unicast peer-group updates
View information about BGP peer-group updates.
C9000 Series
Syntax
debug ip bgp ipv6 unicast peer-group peer-group-name updates [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast peer-group peer-group-name
updates [in | out] command.
Parameters
peer-group peer-
group-name
Enter the keywords peer-group followed by the name of the peer-group.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors.
Border Gateway Protocol 433