Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

451

452

453

454

455

456

457

458

459

460

Parameters

connected Enter the keyword connected to redistribute routes from physically connected

interfaces.

static Enter the keyword static to redistribute manually configured routes. These routes are

treated as incomplete routes.

route-map

map-

name

(OPTIONAL) Enter the keywords route-map followed by the name of an established

route map. Only the following ROUTE-MAP mode commands are supported:

• match ipv6 address

• match ipv6 next-hop

• match ipv6 route-source

• set ipv6 next-hop

If the route map is not configured, the default is deny (to drop all routes).

Defaults Not configured.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Command History

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

7.4.1.0 Introduced

Usage Information

If you do not configure the default-metric command in addition to the redistribute command, or there

is no route map to set the metric, the metric for redistributed static and connected is “0”.

To redistribute the default route (0::0/0), configure the neighbor default-originate command.

Commands

neighbor default-originate – injects the default route.

redistribute ospf

Redistribute OSPFv3 routes into BGP.

C9000 Series

Syntax

redistribute ospf process-id [[match external {1 | 2}] [match internal]]

[route-map map-name]

To stop redistribution of OSPF routes, use the no redistribute ospf process-id command.

Parameters

process-id

Enter the number of the OSPFv3 process. The range is 1 to 65535.

match external {1 |

(OPTIONAL) Enter the keywords match external to redistribute OSPF external

routes. You can specify 1 or 2 to redistribute those routes only.

match internal (OPTIONAL) Enter the keywords match internal to redistribute OSPFv3 internal

routes only.