Administrator Guide

Related
Commands
• capture bgp-pdu neighbor – enables capture of an IPv6 BGP neighbor packet.
• clear ip bgp – specifies a size for the capture buffer.
show config
View the current ROUTER BGP configuration.
C9000 Series
Syntax
show config
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Example
Dell(conf-router_bgp)#show conf
!
router bgp 18508
neighbor RR-CLIENT peer-group
neighbor RR-CLIENT remote-as 18508
neighbor RR-CLIENT no shutdown
neighbor RR-CLIENT-PASSIV peer-group passive
neighbor RR-CLIENT-PASSIV remote-as 18508
neighbor RR-CLIENT-PASSIV subnet 9000::9:0/120
neighbor RR-CLIENT-PASSIV no shutdown
neighbor 1109::33 remote-as 18508
neighbor 1109::33 update-source Loopback 101
neighbor 1109::33 no shutdown
neighbor 2222::220 remote-as 18508
neighbor 2222::220 route-reflector-client
neighbor 2222::220 update-source Loopback 100
neighbor 2222::220 no shutdown
neighbor 4000::33 remote-as 18508
neighbor 4000::33 no shutdown
neighbor 4000::60 remote-as 18508
neighbor 4000::60 no shutdown
neighbor 9000::1:2 remote-as 640
no neighbor 9000::1:2 activate
neighbor 9000::1:2 no shutdown
!
Dell#
show ip bgp next-hop
View all next hops (via learned routes only) with current reachability and flap status. This command only displays one path, even if the next
hop is reachable by multiple paths.
C9000 Series
Syntax
show ip bgp next-hop [local-routes]
Parameters
local-routes (OPTIONAL) Show next-hop information for local routes.
Command Modes
• EXEC
• EXEC Privilege
458 Border Gateway Protocol