Administrator Guide

advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes the
neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on dampened
routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal information
for the IPv6 address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Related
Commands
show ip bgp – view the current BGP routing table.
show ip bgp ipv6 unicast peer-group
Allows you to view information on the BGP peers in a peer group.
C9000 Series
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name (OPTIONAL) Enter the name of a peer group to view information about that peer group
only.
detail (OPTIONAL) Enter the keyword detail to view peer-group-specific information for the
IPv6 address family.
summary (OPTIONAL) Enter the keyword summary to view status information of the peers in that
peer group. The output is the same as that found in show ip bgp summary command
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Example
Dell#show ip bgp peer-group
Peer-group RR-CLIENT, remote AS 18508
BGP version 4
Minimum time between advertisement runs is 5 seconds
Border Gateway Protocol 467