Administrator Guide
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
• For a port extender (PE) Gigabit Ethernet interface, enter the keyword
peGigabitEthernet then the pe-id, stack-unit unit number, and port-id. The pe-id
range is 0–255; the stack unit number range is 0–7; and the port-ID range is 0 –47.
NOTE: The peGigE interface option is only available when the extended
bridge is enabled.
buffer-info Enter the keyword buffer-info to view the total buffer allocated for the Interface
priority-group
group number | all
Enter the keyword priority-group and specify a priority group number or all the
priority groups. The range for priority group is from 0 to 7.
queue
queue
number | all
Enter the keyword queue and specify a queue number or select all for all the queues. The
range for queue number is from 0 to 19.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example (show
hardware buffer
interface peGige
buffer-info)
Dell#show hardware buffer interface peGigE 10/1/1 buffer-info
----- Buffer Stats for Interface PeGi 10/1/1 -----
Maximum Shared Limit for the Interface: 6956
Default Packet Buffer allocate for the Interface: 160
Used Packet Buffer for the Interface: 0
Example (priority-
group 0)
Dell# show hardware buffer interface peGigE 10/1/1 priority-group 0 buffer-
info
----- Buffer stats for unit: 0 port: 1 (interface PeGi 10/1/1) -----
------------------------------------------------------------------------
PG# PRIORITIES ALLOTED (CELLS) COUNTER (CELLS)
MIN SHARED MODE HDRM MIN SHARED HDRM
------------------------------------------------------------------------
0 - 19584 0 STATIC 174 0 0 0
Example (queue
all)
Dell#show hardware buffer interface peGigE 10/1/1 queue all buffer-info
----- Buffer Stats for Interface PeGi 10/1/1 Queue 0 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 1 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 2 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 3 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface PeGi 10/1/1 Queue 4 -----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Debugging and Diagnostics 573