Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

651

652

653

654

655

656

657

658

659

660

gvrp enable

Enable GVRP on physical interfaces and LAGs.

C9000 Series

Syntax

gvrp enable

To disable GVRP on the interface, use the no gvrp enable command.

Defaults Disabled.

Command Modes CONFIGURATION-INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on C-Series, E-Series, and S-Series

Commands

disable — globally disables GVRP.

gvrp registration

Configure the GVRP register type.

C9000 Series

Syntax

gvrp registration {fixed | normal | forbidden}

To return to the default, use the gvrp register normal command.

Parameters

fixed Enter the keyword fixed then the VLAN range in a comma-separated VLAN ID set.

normal Enter the keyword normal then the VLAN range in a comma-separated VLAN ID set.

This setting is the default.

forbidden Enter the keyword forbidden then the VLAN range in a comma-separated VLAN ID

set.

Defaults normal