Administrator Guide

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

Usage Information This command enables (and disables) the collection of CPU traffic statistics from the time this command is

executed (not from system boot). However, excessive traffic a CPU receives automatically triggers (turn on) the

collection of CPU traffic statics.

The following message is an indication that collection of CPU traffic is automatically turned on. To view the traffic

statistics, use the show cpu-traffic-stats command.

If the CPU receives excessive traffic, traffic is rate controlled.

NOTE: This command must be enabled before the show cpu-traffic-stats command displays

traffic statistics. Dell Networking recommends disabling debugging (no debug cpu-traffic-

stats) after troubleshooting is complete.

Commands

show cpu-traffic-stats — displays the cpu traffic statistics.

debug ftpserver

View transactions during an FTP session when a user is logged into the FTP server.

C9000 Series

Syntax