Administrator Guide
Link Partner 1G HD : False
Idle Err Cnt : 0
PHY Extended Control
MDI Crossover_mode : Enabled
Example
Related
Commands
show interfaces — displays information on a specific physical interface or virtual interface.
show interfaces status
To display status information on a specific interface only, display a summary of interface information or specify a line card slot and
interface.
C9000 Series
Syntax
show interfaces [interface | linecard slot-number] status
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port (ports or port-range) information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port (ports or port-range) information.
• For a Loopback interface, enter the keyword loopback then the slot/port
information. The range is from 0 to 16383.
• For a Port-Channel interface, enter the keyword port-channel then the number.
The range is from 0 to 128.
• For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the
pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id range is from 1 to 48.
NOTE: The peGigE interface option is only visible when the feature extended
bridge is enabled.
linecard
slot-
number
(OPTIONAL) Enter the keyword linecard then the slot number. The slot ID is from 0 to
11.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
Interfaces 719