Administrator Guide

PeGi 255/3/26 Up 1000 Mbit Full --
PeGi 255/3/27 Up 1000 Mbit Full --
PeGi 255/3/28 Up 1000 Mbit Full --
PeGi 255/3/29 Up 1000 Mbit Full --
PeGi 255/3/30 Up 1000 Mbit Full --
PeGi 255/3/31 Up 1000 Mbit Full --
PeGi 255/3/32 Up 1000 Mbit Full --
PeGi 255/3/33 Up 1000 Mbit Full --
PeGi 255/3/34 Up 1000 Mbit Full --
PeGi 255/3/35 Up 1000 Mbit Full --
PeGi 255/3/36 Up 1000 Mbit Full --
PeGi 255/3/37 Up 1000 Mbit Full --
PeGi 255/3/38 Up 1000 Mbit Full --
PeGi 255/3/39 Down Auto Auto --
PeGi 255/3/40 Up 1000 Mbit Full --
PeGi 255/3/41 Down Auto Auto --
PeGi 255/3/42 Down Auto Auto --
PeGi 255/3/43 Up 1000 Mbit Full --
PeGi 255/3/44 Up 1000 Mbit Full --
PeGi 255/3/45 Up 1000 Mbit Full --
PeGi 255/3/46 Down Auto Auto --
PeGi 255/3/47 Up 1000 Mbit Full 111
PeGi 255/3/48 Up 1000 Mbit Full 111
Related
Commands
show interfaces — displays information on a specific physical interface or virtual interface.
show interfaces switchport
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode interfaces’ IEEE 802.1Q tag status
and VLAN membership.
C9000 Series
Syntax
show interfaces switchport [interface] [linecard slot-id]
Parameters
interface (OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port (ports or port-range) information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port (ports or port-range) information.
• Enter the keyword backup to view the backup interface for this interface.
• For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the
pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id range is from 1 to 48.
NOTE: The peGigE interface option is only visible when the feature extended
bridge is enabled.
linecard slot-id Enter the linecard slot-id parameters to specify the switch ports on a line card.
The range of slot IDs is from 0 to 11.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Interfaces 723