Administrator Guide

ip ftp username
Assign a user name for outgoing FTP connection requests.
C9000 Series
Syntax
ip ftp username username
To return to anonymous FTP connections, use the no ip ftp username [username] command.
Parameters
username Enter a text string as the user name up to 40 characters long.
Defaults No user name is configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information Configure a password with the ip ftp password command.
Related
Commands
ip ftp password — sets the password for FTP connections.
ip http source-interface
Configure an interface’s IP address as the source IP address for HTTP connections.
C9000 Series
Syntax
ip http source-interface interface
To delete an interface, use theno ip http source-interface interface command.
Parameters
interface
Enter the following keywords and slot/port or number information:
• For Loopback interfaces, enter the keyword loopback then a number from zero (0)
to 16383.
• For a Port Channel interface, enter the keyword port-channel then a number. The
range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Control and Monitoring 79