Administrator Guide

ip directed-broadcast
Enable the interface to receive directed broadcast packets.
C9000 Series
Syntax
ip directed-broadcast
To disable the interface from receiving directed broadcast packets, use the no ip directed-broadcast
command.
Defaults Disabled (that is, the interface does not receive directed broadcast packets)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
ip domain-list
Configure ip domain names to complete unqualified host names.
C9000 Series
Syntax
ip domain-list name
To remove the name, use the no ip domain-list name command.
Parameters
name Enter an ip domain name to complete unqualified names (that is, incomplete domain
names that cannot be resolved).
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
IPv4 Routing 865