Administrator Guide

• dest-ip — Uses destination IP address and destination port fields to hash. The
hashing mechanism returns a 3-bit index indicating which port the packet should be
forwarded.
• source-ip — Uses source IP address and source port fields to hash. The hashing
mechanism returns a 3-bit index indicating which port the packet should be
forwarded.
mac {dest-mac |
source-dest-mac |
source-mac}
Enter the keywords to distribute MAC traffic based on the following criteria:
• dest-mac — Uses the destination MAC address, VLAN, Ethertype, source module
ID and source port ID fields to hash. The hashing mechanism returns a 3-bit index
indicating which port the packet should be forwarded.
• source-dest-mac — Uses the destination and source MAC address, VLAN,
Ethertype, source module ID and source port ID fields to hash. The hashing
mechanism returns a 3-bit index indicating which port the packet should be
forwarded.
• source-mac — Uses the source MAC address, VLAN, Ethertype, source module ID
and source port ID fields to hash. The hashing mechanism returns a 3-bit index
indicating which port the packet should be forwarded.
tcp-udp enable Enter the keywords to distribute traffic based on the following:
• enable — Takes the TCP/UDP source and destination ports into consideration
when doing hash computations. This option is enabled by default.
ingress-port
enable
Enter the keywords to distribute traffic based on the following:
• enable — Takes the source port into consideration when doing hash computations.
This option is disabled by default.
Defaults IP 4-tuple (IP SA, IP DA, Source Port, Destination Port)
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Added the ingress-port parameter for the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information By default, the system distributes incoming traffic based on a hash algorithm using the following criteria:
• IP source address
• IP destination address
• TCP/UDP source port
• TCP/UDP destination port
Related
Commands
hash-algorithm ecmp — changes the hash algorithm across an ECMP.
IPv4 Routing 877