Administrator Guide

Example
Dell#show cam-ipv6 extended-prefix
Cam-Ipv6-LPM Extended Prefix
--------------------------------
Current Settings
cam-ipv6-max-/65-to-/128-Prefix : 2048
Dell(conf)#
show ipv6 cam linecard
Display the IPv6 CAM entries for the specified line card.
C9000 Series
Syntax
show ipv6 cam linecard slot id port-set number [vrf vrf-name][X:X:X:X::X |
summary]
Parameters
slot-id Displays the cam entries for the mentioned linecard id.
port-set Enter the keyword port-set and specify the port-set number. The port-set number
value is 0.
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed and the name of the VRF to display IPv6
CAM entries corresponding to that VRF.
NOTE: If you do not specify this option, IPv6 CAM entries corresponding to
the default VRF are displayed.
X:X:X:X::X (OPTIONAL) Enter the network address or host name.
summary (OPTIONAL) Enter the keyword summary to display a table listing network prefixes and
the total number prefixes which can be entered into the IPv6 CAM.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Example
Dell#show ipv6 cam linecard 10 port-set 0
Neighbor Mac-Addr Port VId EC
---------------------------------------------------------------
fe80::2ff:eff:fe3f:a1 00:00:00:00:00:00 CP 0 0
2::3 00:00:00:00:00:00 CP 0 0
refix Mac-Addr Port VId EC
---------------------------------------------------------------
2::/64 00:00:00:00:00:00 CP 0 0
IPv6 Basics 937