Administrator Guide

fe80::/10 00:00:00:00:00:00 NuP 0 0
::/0 00:00:00:00:00:00 CP 0
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
C9000 Series
Syntax
show ipv6 control-plane icmp
Default 100
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Example
show ipv6 fib linecard
Display all forwarding information base (FIB) entries for a line card.
C9000 Series
Syntax
show ipv6 fib linecard slot-id port-set number [vrf vrf-name] [summary | ipv6-
address]
Parameters
slot-id Enter the linecard slot-id. The range is from 0 to 11.
port-set number Enter the keyword port-set and the port-set number value. The number value is 0.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display neighbors
corresponding to that VRF.
summary (OPTIONAL) Enter the keyword summary to view a summary of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have more
specific prefixes. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
938 IPv6 Basics