Administrator Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information
To return VLAN 1 as the Default VLAN, use this command syntax (default-vlan-id 1).
The Default VLAN contains only untagged interfaces.
Use this command in Configuration Terminal Batch mode to specify a default VLAN in a dual-homing setup.
Related
Commands
interface vlan — configures a VLAN.
default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly configured as a member of another
VLAN.
C9000 Series
Defaults
Enabled
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced
Usage Information The no default vlan disable command is not listed in the running-configuration, but when the default
VLAN is disabled, default-vlan disable is listed in the running-configuration. Use this command in
Configuration Terminal Batch mode to disable the default VLAN in a dual-homing setup.
name
Assign a name to the VLAN.
C9000 Series
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
970 Layer 2